Orchard and Vineyard Shredders
Contact us Visit manufacturer’s website
- Description
- Models / Specification
- Over-ground shredder intended for shredding vine shoots and other clippings – High travel speed – Exceptional shredding quality – Pick-up drive through largely dimensioned chain – Pick-up protected by a cam type cut-out clutch – Rotor equipped with forged hammer knives in helical arrangement – Heavy-duty bearings fitted to the pick-up and the rotor – Height control using roller with removable ends and semi-pivoting wheels – Freewheel in gearbox.
-
Orchard and Vineyard Shredders
For more information & brochures click on models below
Comparison Specifications TRP 95 TRP 120 RT TRP 120 TRP 145 RT-CV TRP 145 TRP 175 RT-CV TRP 175 VKD 155 VKD 170 VKD 190 VKD 210 Specifications Linkage 3-point mounted 3 points – Cat. 1 + 2 3-point mounted 3 points – Cat. 1 + 2 3-point mounted 3 points – Cat. 1 + 2 3-point mounted 3 point 3 point 3 point 3 point Linkage Offset (cm) - - - - - - - 36 45 45 45 Offset (cm) Working width (m) 0.95 1.2 120 1.45 1.45 1.73 1.73 1.56 1.7 1.9 2.1 Working width (m) Overall width (m) 1.21 1.65 146 1.9 1.72 2.18 1.99 1.66 1.85 2.05 2.25 Overall width (m) Transmission 13/8″- 6 splines 1 3/8″ 6 splines 13/8″- 6 splines 1 3/8″ 6 splines 13/8″- 6 splines 1 3/8″ 6 splines 13/8″- 6 splines 13/8″- 6 splines 13/8″- 6 splines 13/8″- 6 splines 13/8″- 6 splines Transmission Outer diameter of rotor (mm) 466.5 465 466.5 465 466.5 465 466.5 423 423 423 423 Outer diameter of rotor (mm) Diameter of rotor tube (mm) 193.7 193.7 193.7 193.7 193.7 193.7 193.7 152 152 152 152 Diameter of rotor tube (mm) Thickness of rotor tube (mm) 8 8 8 8 8 8 8 8 8 8 10 Thickness of rotor tube (mm) Speed of rotor/s at 540 min-1 (min-1) 2188 2600 2188 2600 2188 2600 2188 2325 2325 2325 2325 Speed of rotor/s at 540 min-1 (min-1) Speed of rotor/s at 1000 min-1 (min-1) - 3250 - 3250 - 3250 - - - - - Speed of rotor/s at 1000 min-1 (min-1) Linear speed of rotor (m/s) at P.T.O 540 min -1 53.4 64 53.4 64 53.4 64 53.4 51.5 51.5 51.5 51.5 Linear speed of rotor (m/s) at P.T.O 540 min -1 Linear speed of rotor (m/s) at P.T.O 1000 min -1 - 76 - 76 - 76 - - - - - Linear speed of rotor (m/s) at P.T.O 1000 min -1 Number of hammer knives 12 16 16 20 20 24 24 16 18 20 22 Number of hammer knives Drive Pick up by chain – Rotor by belts Pick up per chain – Rotor per belts Pick up by chain – Rotor by belts Pick up per chain – Rotor per belts Pick up by chain – Rotor by belts Pick up per chain – Rotor per belts Pick up by chain – Rotor by belts Free wheel Free wheel Free wheel Free wheel Drive Number / Type of belts 3/SPBX1600 3/SPBX 3/SPBX1600 4/SPBX 4/SPBX1600 5/SPBX1600 5/SPBX1600 3/SPBX 3/SPBX 3/SPBX 3/SPBX Number / Type of belts Weight (kg) 625 1070 790 1200 950 1300 1075 510 560 600 640 Weight (kg) Minimum power requirement for PTO (kW) 29 59 37 59 42 59 47 30 32 35 40 Minimum power requirement for PTO (kW) Minimum power requirement for PTO (hp) 39 80 50 80 57 80 64 40 45 50 55 Minimum power requirement for PTO (hp) Maximum authorised tractor power (kW) 66 66 66 66 66 66 66 40 40 48 51 Maximum authorised tractor power (kW) Maximum authorised tractor power (hp) 90 90 90 90 90 90 90 55 60 65 70 Maximum authorised tractor power (hp) Rear Hood Moving - Moving - Moving - Moving Moving Moving Moving Moving Rear Hood Height control Roller or semi-pivoting wheels Roller or wheels Roller or semi-pivoting wheels Roller or wheels Roller or semi-pivoting wheels Roller or wheels Roller or semi-pivoting wheels
Leave a Reply
You must be logged in to post a comment.
